User Interface; Main Board - Delta WASP 40100 Clay Manual Of Use And Maintenance

5.2. User interface

5.2.1. Main board

1
LDM mode
100%
F R
WASP 2040 Clay ready
2
3
The main board appears when turning on the printer and when launching the print. It is intended to be the
principal tool for the monitoring and control of the printer
Legend:
1. Technology
2. Feedrate
3. Operative information: position, feed, flow, state, autocalibration on/off
4. Process percentage
5. Z axis position
6. Time of work
© CSP S.r.l. © CSP S.r.l.
Z1000.00
SD---%
Fig. 5.2.1 - Main board
Preparing to use the printer
--:--
4 6
5
5
25
25