Printing Bed; First Printing Layer - Delta WASP 40100 Clay Manual Of Use And Maintenance

6.2. Printing bed

NOTE: The printer has been designed to print directly on the working surface so that the machine
can be moved to proceed with new prints.
NOTE: Another option is printing directly on the bed of the printer. This bed needs to be calibrated
on the first use.
To improve the adhesion of the first layers different kinds of beds can be used.
The Manifacturer provides small discs in marine multilayered. Depending on the applications other
kinds of beds can be used. The Z axis value must be updated depending on the thickness of the bed.

6.3. First printing layer

NOTE:
To facilitate the adhesion of the printed part maintain a distence of 2 mm between nozzle and bed.
ATTENZIONE:
Moving parts. Possibility of crushing and cutting.
With LDM WASP extruder keep 1mm of distance from the bed
With LDM WASP extruder XL depending on the diameter of the nozzle set as distance half of the diameter
from the bed
© CSP S.r.l. © CSP S.r.l.
First use of the printer
31
6
31