Table of Contents
Advertisement
5
Preparing to use the printer
1. Main menu
Machine not printing
•
Main menu: go back to main screen
•
Prepare: allows managing various settings of the printer
•
Advanced: allows managing advanced settings on the printer
•
SD Card menu: access files inside inside the SD Card for printing (only with SD card)
•
Free zeta system: Allows restarting the print from a certain height (only with SD card)
•
Resurrection: in case of blackout allows recovering the print with the automatically saved coordinates (only
with SD Card)
•
Info: shows the firmware installed on the printer
•
Main menu: Goes back to the previous menu
•
Disable steppers: disables the motors leaving the printer free to move
•
Auto home: for zeroing the axis
•
Move axis: allows moving the axis X, Y, Z, E of decided lenghts
•
Modify height: allows changing the distance between nozzle and printing bed
•
Manual leveling: Allows the zeroing of the printer on the three points of regulation
Machine printing
•
Main menu: go back to main screen
•
Tune: allows managing various settings of the printer
•
Pause: allows pausing the print. Click the control handle to resume
•
Change material: allows changing the material during the print.
•
Stop & save: Allows stopping the print to resume it afterwards. A .ressurr file will be created in the original
directory of the file. Select the .resurr file and wait for the start.
•
Stop print: Allows stopping definitely the printing of a .gcode
•
Info: shows the firmware installed on the printer
26
26
© CSP S.r.l.
© CSP S.r.l.
Advertisement
Table of Contents
