Pedal Set Up; Power; Auto Power Off; Setting The Volume - Gear4music DP-12 User Manual

PEDAL SET UP

After following the DP-12 assembly guide, and
before powering on the piano, please ensure that
the foot pedal unit is connected to the pedal input
jack on the rear connection panel.

POWER

Safely connect the included power supply firstly to
the piano and then the mains, before turning on the
piano by pressing the [STANDBY/ON] button. The
display will light up.

AUTO POWER OFF

The unit will Auto Power Off after 30 minutes of no
operation, except when playing demo songs.
To de-activate the Auto Power Off function: press
the [FUNCTION/RIGHT] button to enter edit mode.
Then press piano key Eb0. The display will show
"oFF." Repeat this process to re-activate the Auto
Power Off function, the display will this time show
"on."

SETTING THE VOLUME

It is advised to set the [MASTER VOLUME] to "MIN"
when powering on the piano, and then adjust the
volume to your desired level when playing.
7