Touch; Reverb & Chorus Effects - Gear4music DP-12 User Manual

TOUCH

The DP-12 has four levels of touch sensitivity,
allowing you to find the ideal level of key response
to suit your playing style.
To set the level of sensitivity, press the [FUNCTION/
RIGHT] button to enter edit mode, followed by the
desired touch select key:
F#3 = LOW (play the keys harder to produce the
maximum output. Useful for quieter performances.)
Ab3 = NORMAL (standard playing strength is
required to produce maximum output.)
Bb3 = HIGH (requires less playing strength to
produce maximum output. Useful for louder
playing.)
Eb3 = FIXED (turns off the touch sensitivity,
meaning the same volume is produced regardless
of how hard or soft the keys are played.)
The display will show the selected sensitivity
setting.
REVERB & CHORUS EFFECTS
The DP-12 has 10 reverb and 13 chorus built-in
effects, to add extra depth and expression to your
performances.
REVERB
To select the reverb type, press the [FUNCTION/
RIGHT] button to enter edit mode, followed by
piano key Eb2. The data control wheel can now be
used to choose the desired reverb type from the list
below:
DISPLAY NUMBER
000
001
002
003
004
005
006
007
008
009
010
To turn the reverb effect off, turn the data control
wheel until the display shows "000."
To adjust the reverb level, press the [FUNCTION/
RIGHT] button to enter edit mode, followed by
piano key F#2. The data control wheel can now be
used to control the amount of reverb from 0-127, as
shown on the display.
REVERB TYPE
No Reverb
Hall 1
Hall 2
Room 1
Room 2
Room 3
Stage 1
Stage 2
Plate
Delay
Echo
16