Table of Contents
Advertisement
Managing Access in App
Creating PIN codes
PIN codes can be generated on the app under [Access], create [+Access] and choose either
One-Time, Permanent or Duration PIN.
Pin codes will expire if its not use within its activation period. Refer to the table below.
One-Time PIN
Permanent PIN
Note: Duration PIN code end times can be customised within a 28-day timeframe. Past this
timeframe, the end time will automatically be configured to the start time.
Bluetooth Guest Key
2
Bluetooth Guest Key can be shared with other users for mobile access. It allows your guests
to unlock the igloohome smart lock via Bluetooth.
There are 3 steps to using a Shared Bluetooth Key
Under [Access], create [+Access] and choose [Bluetooth Key] under
1.
[Access Type]. Proceed to share the key after it is created.
2.
Guest receives the Bluetooth Key by one of these methods:
Guest can now use the Bluetooth Key under [Visits] whenever he is within
3.
range of the lock.
Notes:
•
The owner can revoke the Bluetooth Key in App.
•
Bluetooth Key must be accepted within 1 hour generation before it expires.
Adding Key Card
3
1. Under [Access], select [+Access] followed by [Key Card Holder].
2. Follow instructions on the app and select [Done] to complete the process.
Resetting PIN codes
4
Ensure that Bluetooth is switched on, and you are within Bluetooth range of the lock.
Go to Home > Select Lock Name > [Settings] > Reset Pins
Lock will reset all codes, except for Master PIN, and all PIN codes previously generated are no
longer valid.
PIN Type
Duration PIN
• Clicking the URL given and follow the instructions.
• Scanning the QR code under [Visits].
Use PIN within*
24 hrs of generation
24hrs of generation
24hrs from the start time
19
Advertisement
Table of Contents
