Table of Contents
Advertisement
Managing Access in App
Creating PIN codes
PIN codes can be generated on the app under [Access], create [+Access] and choose either
One-Time, Permanent, Duration PIN or Recurring PIN.
Pin codes will expire if its not use within its activation period. Refer to the table below.
One-Time PIN
Permanent PIN
Note: Duration PIN code end times can be customised within a 28-day timeframe. Past this
timeframe, the end time will automatically be configured to the start time.
Bluetooth Guest Key
2
Bluetooth Guest Key can be shared with other users for mobile access. It allows your guests
to unlock the igloohome smart lock via Bluetooth.
There are 3 steps to using a Shared Bluetooth Key
1.
Under [Access], create [+Access] and choose [Bluetooth Key] under
[Access Type]. Proceed to share the key after it is created.
2.
Guest receives the Bluetooth Key by one of these methods:
3.
Guest can now use the Bluetooth Key under the Guest Bluetooth Key Section
whenever he/she is within range of the lock.
Notes:
•
The owner can revoke the Bluetooth Key in App.
•
Bluetooth Key must be accepted within 1 hour generation before it expires.
Adding Key Card
3
1. Under [Access], select [+Access] followed by [Keycard].
2. Wait until the confirmation of the lock by an audio indicator (long beep).
3. Tap key card(s) on the lock to add and then rename the key card(s) on the App right away.
4. Follow instructions on the app and select [Done] to complete the process.
PIN Type
Duration PIN
Recurring PIN
• Clicking the URL given and follow the instructions.
• Claiming Bluetooth Key under [Configuration].
Use PIN within*
24 hrs of generation
24hrs of generation
24hrs from the start time
24hrs from the start time
25
Advertisement
Table of Contents
