Unpacking The Shipping Carton - VeriFone V200c Installation Manual

Table 1 PIN Entry Protection Measures
Method
Cashier
Countertop with No Action Needed
Swivel Stand
Countertop without
Position the V200c and
stand
V400c to face away
from the cashier. Use
signage to block
cashier's view.
NOTE
Unpacking the
Shipping Carton
NOTE
The following table shows the combinations of methods that must be used when
installing V200c and V400c terminals to protect the cardholder's PIN during PIN
entry.
Customer Queue
Customer positions
V200c and V400c
Position the V200c and
V400c between customer
and the next in queue.
Install the optional
privacy shield.
A swivel stand gives the cardholder freedom to position the terminal to optimize
their viewing angle. If you are installing a swivel stand, you must include prompts
in your application directing the cardholder to position the V200c and V400c
terminals strategically to restrict the view of other customers.
Additionally, you may wish to implement the following to further increase security
during PIN entry.
•
Offer PIN security literature at the point of sale
•
Use signage to limit the view of V200c and V400c terminals to just that of the
cardholder
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. V200c and V400c terminals are secure products and any
tampering may cause the devices to cease functioning properly.
1
Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
2
Remove and inspect the following items:
•
Terminal
•
Power pack
•
Telephone line cord
•
Paper roll
Verifone ships variants of the V200c and V400c terminals for different markets.
Your terminal may have different accessories described in this section.
Refer to Accessories and Documentation
accessories.
Observation Corridors
Customers
Elsewhere
No Action
Needed
Privacy Shield
Installed
for more information about related
V200

Unpacking the Shipping Carton

On-Site
Cameras
Do not install within
view of cameras
Do not install within
view of cameras.
V400 I G
C AND C NSTALLATION
S
ETUP
13
UIDE