Table of Contents
Advertisement
Environmental
Factors
Inside the
Shipping
Carton
Unpacking the
Shipping Carton
•
Wires protruding out of the device.
•
Foreign objects inserted into the smart card slot or magnetic stripe slot.
•
Any bumps in the casing below the mag stripe slot and any noticeable
additional mag stripe head from the side.
•
Signs of damage to the tamper-evident labels.
•
A Tamper Warning message on the device display.
If any device is found to have been tampered with, please remove it from
the service immediately. Keep it available for potential forensics
investigation and notify your company security officer and your local
Verifone representative or service provider. To contact Verifone, please see
Service and
Support.
For terminals equipped with a privacy shield, perform daily inspections to
ensure that the privacy shield is installed and has not been removed.
•
Do not use the device where there is excess heat, dust, humidity, moisture,
caustic chemicals, or oils.
•
Keep the device away from direct sunlight and anything that radiates heat.
•
The contactless antenna is located around the display. Avoid having metallic
objects in the proximity of a contactless antenna.
•
Select a location convenient for the customer. Avoid dusty, hot, or damp
locations.
•
To minimize data reading or writing errors, pick a location free from magnetic
interference. Choose a spot at a safe distance away from objects or units that
generate magnetism.
Open the shipping carton and carefully inspect its contents for possible
tampering or shipping damage.
To unpack the shipping carton:
1
Carefully inspect the shipping carton.
2
Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
3
Remove the tape on the carton box.
Installation Guide
IX90 M440
16
© VeriFone Inc. All rights Reserved.
Advertisement
Table of Contents
