General Informations; Mechanical Dimensions - gefran I3 Series Instruction Manual

This manual applies to IN-I3-IX-IE series and to IE - I7 performance level "c" series produced by Gefran spa,
via sebina 74-25050 Provaglio di'Iseo - BS- Italy.
1.1 General information
This manual must be kept near the equipment for easy reading and consultation.
It must be read, understood, and strictly follow in order to avoid and prevent accidents and/or malfunctions.
Gefran will not be liable for any injury to people and/or damage to property deriving from disregard of
this manual.
1.2 Copyright
Any re production of this document, even partial or for internal use, requires Gefran's approval.
1.3 Correct use
Gefran Melt pressure sensors with amplified or non-amplified electrical output are designed and built
to measure the pressure and temperature variable of melted plastic at different temperatures according
to the filling fluid used.
The correct temperature range is: 350°C.
If the sensors are used as a safety component in compliance with the Machinery directive, it's
necessary to read carefully the "Safety Manual" in annex.
For the mechanical dimensions keep as reference the product datasheets or Gefran website www.gefran.com
80175G_MAN_I3-IE-IN-IX_I7_11-2018_ENG
GENERAL INFORMATION
1.

MECHANICAL DIMENSIONS

2.
3