Table of Contents
Advertisement
SRP/CS interface and protection devices
The SRP/CS interface is the multi-polar connector type 6 poles VEAM VP07RA10-6PT2 or the multi-polar
connector type BINDER 8 poles M18 DIN/EN 45326, as illustrated in Figure 4, where are also pointed out the
connections in case of voltage amplified output (4 wires: 2 for supply and 2 for signal) or current amplified (2
wires connection).
In the case of relay output with retransmitted output in current (2 wires) or voltage (4 wires) the connections
are shown in Figure 5.
ELECTRICAL CONNECTIONS
VOLTAGE OUTPUT
CURRENT OUTPUT
6 pin connector VPT07RA10-6PT2
(PT02A-10-6P)
22
The cable shield is tied to connector via cable clamp
The cable shield is tied to connector via cable clamp
Figure 4 - SRP/CS interface
8 pin connector (Binder)
M16 DIN/EN45326 (09-0173-00-08)
80175G_MAN_I3-IE-IN-IX_I7_11-2018_ENG
Advertisement
Table of Contents
