Operating Introduction - How To Operate; Touch Key And The Display Panel; The Name And Function Of Touch Key - INVENTOR SMR-25L User Manual

5. OPERATING INTRODUCTION - HOW TO OPERATE

5.1 Touch key and the display panel

5.2 The name and function of touch key

POWER ON/OFF
By pressing the "POWER" button the dehumidifier turns on or off. When turning on the
dehumidifier the display will turn on and the air grill will open.
When turning on the device for the first time or after a power shortage or after unplugging
the device it is set to operate automatically in Dry clothes mode.
When turning on the device without unplugging it or without a power shortage, the device
will resume its previous operations before shutting down.
When the room's humidity level reaches 3% -5% below the desired set humidity level,
the device compressor will automatically stop, while the fan will continue to operate.
Continuous fan operation contributes to energy savings as the device identifies the relative
humidity of the area, allowing the compressor to operate much less in a 24-hour period.
Note: In order to extend the compressor΄s lifetime there is a 5 minutes delay after the
compressor's last operation for the compressor to start operating again.
While the device is operating by pressing the button Power the device will immediately turn
off if the Inner Dry function is not activated.
DRY
By pressing the "Dry" button you may choose between the Automatic clothes dryer or the
Manual clothes dryer.
Automatic Clothes Dryer
Once the Automatic Clothes Dryer is enabled the infrared humidity sensor will scan the
room to detect the wet clothes. The dehumidifier will be operating until the clothes are dry.
When the clothes are dry the device will turn off.
8
EN