Coolant Replacement; Water Pump Impeller Replacement; Disposal And Scrapping - Kohler KDI 2504 TCR MGWI Owner's Manual

6

6.5 Coolant replacement

1. Perform the operation described in Par. 5.7.

6.6 Water pump impeller replacement

• Replace gasket G.
1. Loosen capscrews A and remove cover B.
2. Remove impeller C from pump body D.
3. Grease the new impeller C.
4. Insert the new impeller C onto shaft E.
5. Fasten cover B with capscrews A and insert gasket G
between cover B and pump body D.
C
6.12

6.7 Disposal and scrapping

• In case of scrapping, the engine shall be disposed of in
appropriate locations, in conformity with the law in force.
• Before scrapping, it is necessary to separate the rubber or
plastic parts from the rest of the components.
EN
38
INFORMATION ABOUT REPLACEMENTS
Important
E
A
B
6.11
A B
6.13
• The parts only composed of plastic material, aluminium
and steel can be recycled if collected by the appropriate
centers.
• Waste oil must properly be recycled and disposed of in the
correct way to safeguard the environment. According to the
laws in force, it is classified as hazardous waste, therefore it
must be collected by the appropriate centers.
D
C
D
G