Water Pump Impeller Replacement; Coolant Replacement - Kohler KDI 2504 M-MP Owner's Manual

6

6.4 Water pump impeller replacement

Important
• Replace gasket G.
1 - Loosen capscrews A and remove cover B.
2 - Remove impeller C from pump body D.
3 - Grease the new impeller C.
4 - Insert the new impeller C onto shaft E.
5 - Fasten cover B with capscrews A and washers F and insert
gasket G between cover B and pump body D.
C
Fig. 6.8

6.5 Coolant replacement

1 - Undo cap A to drain all liquid from the system contained in
the engine crankcase ducts into an appropriate container
(Par. 3.5).
Important
• Perform the operations described in Par. 5.7 before
proceeding.
• Replace gasket C.
2 - Screw cap A onto crankcase B, inserting gasket C
(tightening torque 50 Nm).
3 - Perform the operations described in Par. 4.7.
EN
30
INFORMATION ABOUT REPLACEMENTS
E
A
B
Fig. 6.7
A F B
Fig. 6.9
B A
Fig. 6.10
B
Fig. 6.11
D
C
G D
B
A C
ED0053031100 _00