Labnet BioPette PLUS Quick Start Manual page 8

MULTICHANNEL
8 - SPARE PARTS
The spare parts for multichannel in, (Fig. 1, 4, 5):
A: Pipetting pushbutton
B: Adjustment knob
C: Ejector button
D: Piston's assembly
E: Tip cone
F: Ejector
G: Calibration key
J: Locking ring
can be ordered from your Labnet representative (type of
pipette and name of the part for this pipette should be
specified).
Warning: The replacement of the piston requires con-
ducting of calibration procedure according to section 5.
Before returning a pipette to a Labnet representative
please ensure that the pipette is completely free of any
contamination (chemical, microbial or radioactive).
Contact Labnet at +1 732-417-0700
fax: +1 732-417-1750
email: labnet@labnetlink.com
All rights reserved. Product described in this manual is subject to availa-
bility and technical modification. Errors excepted.
PZ HTL S.A. reserves the right to improve, enhance or otherwise modify
its products without prior notification.
© 2010 PZ HTL S.A.
9
A1: Pushbutton A2: Knob
BPPM/04/2010