Page 1
This product is meant to be assembled by an adult. WARNING In its unassembled state, small parts present a hazard. To be used under direct supervision of an adult. Please Recycle DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Please visit www.copernicused.com/warranty and complete the form within 10 business days from product Warranty assembly. By registering your product, you will be entered into a draw to win Copernicus product. Make a Warranty Claim We offer a Lifetime Warranty on almost everything we make. Please call 1-800-267-8494 or email info@copernicused.com to start your warranty claim.
Page 3
Do not install or use the electrical components of this unit during a lightning storm. Electrical Shock Do not climb on, hang from or suspend objects from any components of your product unless otherwise specified. Climb Hazard DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 4
Power Adapter Ring Light Tools (Not to Scale) 4mm Allen Key (43281) Contents - DCS7 M6 x 50mm Ring Light Bracket Hook & Loop Straps (43321) DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 5
Email our Tech Support Service at info@copernicused.com Need Tech Support? Check out some of our Have a Question? other great products! Email our Tech Support Service www.copernicused.com DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 6
Actual Size: M6 Nylon Washer M6 Knob You will need: (Not to Scale) Adjustment Lip Fasten adjustment lip to top arm pre-assembly DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 7
Attach Ring Light on top of Ring Light Bracket Hold the Ring Light facing forwards and turn thumb screw from the bottom. Plug in Power Adapter Use hook & loop to keep cables tidy DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
To hold the VGA cable in place, use provided VGA strap. Tie the strap around the adapter cable and then loop over the edge of the Top Arm. DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 9
The holes are made for 1/4” or M6 flat head bolts/screws. Holes are countersunk. The length and type of your hardware depends on your surface thickness. Mounting hardware not included. DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 10
Adjustment Lip into the minimum position, then tighten Using Dewey with Smartphones Smartphones must be used with Dewey in the Landscape position. Camera on this side DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Students version receives content, participate in Version) activities and submit responses. NOTE: If the screen of your device turns off while in use, adjust sleep mode time in settings. DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Page 12
By rotating the top arm 90 degrees, change between landscape and portrait By tilting down the top arm, switch between document camera and projection. tablet stand position. DCS7 - Version C - Released March 30, 2020 - Copernicus Educational Products Inc.
Need help?
Do you have a question about the DCS7 and is the answer not in the manual?
Questions and answers