Necta Samba Top Installation Operation & Maintenance page 41

Eva-Dts
Two codes are used to identify the machine and recog-
nise the data transfer terminal according to the EVaDts
(European Vending Association Data Transfer System)
communication protocol.
To access the settings (such as communication speed,
type of transmission, ...), choose the communication
protocol you wish to use with the data acquisition device.
Use the scrolling keys � and � to scroll the communi-
cation protocols.
Data traNsmissioN
Activate this function to enable the machine to send the
data to a data acquisition device.
(
traNsmissioN spEED
To choose the communication speed of transmission.
Setup by default 2400bps.
coNNEctioN
If you activate this function, the machine will be waiting
for connection with a device in order to acquire EVADTS
data.
Display statistics
Press the Enter key � to display the data you have
stored in sequence, i.e:
1 - counter by single selection;
2 - counter by band;
3 - failure counter;
4 - coin mechanism data.
5 - photocell error counter.
6 - motor error counter
7 - coin mechanism data.
8 - safety temperature exceeded (models with food man-
agement enabled only)
© by N&W GLOBAL VENDING S.p.A.
)
bauDratE
DElEtE statistics
Statistics can be reset either globally (all types of data)
or selectively, i.e. by:
1 - counter by single selection;
2 - counter by band;
3 - failure counter;
4 - coin mechanism data.
5 - photocell error counter.
6 - motor error counter
7 - coin mechanism data.
8 - safety temperature exceeded (models with food man-
agement enabled only)
Press the Enter key � to display the request for confir-
mation "Do you confirm?" � flashing on and off.
Press the Enter key to display the "Execution" message
for some seconds and to reset statistics.
D
isplay rElativE statistics
Press the Enter key � to display the data you have
stored in sequence, i.e:
1 - counter by single selection;
2 - counter by band;
3 - failure counter;
4 - coin mechanism data.
5 - photocell error counter.
6 - motor error counter
7 - coin mechanism data.
8 - safety temperature exceeded (models with food man-
agement enabled only)
35
12 2008 3335 00