Loading Spiral Trays - Necta Samba Top Installation Operation & Maintenance

SofTVENd
s is available in some models only.
oftvEnd
In its home position,
softvEnd
lower tray.
to load trays, act as follows:
- Turn the key intended to open the slide-in compartment
and wait for to reach about half height.
softvEnd
- Open the slide-in compartment and the glassfront.
- Extract the lower trays and load them.
- lower down to load the other trays.
softvEnd
- As soon as you power on the machine,
automatically reach the initial position.
attention !!!
However, you can operate
avoid any misalignment during the manual move-
ment, never forget to use both handles.
fig. 11
1- Handles
© by N&W GLOBAL VENDING S.p.A.
is generally as high as the
will
softvEnd
manually. To
softvEND

loadiNg SPiral TrayS

sNack proDucts
- Extract one tray at a time by lifting and pulling it past the
retaining slide.
Fig. 12
The upper trays will tilt downwards to facilitate the load-
ing cycle.
Fig. 13
- Load the products from the outside to the inside. Avoid
inserting any package at a temperature above 30°C.
Make sure that all spaces are filled. The product bottom
must rest at the bottom of the compartment with the
label facing the glassfront so that it can be recognised.
all products shall be easily insertable between the
spirals. avoid inserting any object that is too large.
10
12 2008 3335 00