Machine Configuration - Necta Samba Top Installation Operation & Maintenance

macHiNE coNfiguraTioN

This group of functions is intended to check all param-
eters relative to the operation of the machine.
MaCH I nE C on F I Gu R atI o n
Dat E anD t I M E s Et
Co o lI n G Pa R aM E t E Rs
DB M anaG E M E n t
DI s P l aY
ME nu M an aGE ME n t
sP I R a ls an D s E lECtI o n s
P Hoto CE l l PaR a M Et ERs
En ERGY saV I n G
T EC H > x .x
D
atE aND timE sEt
Function used to set up the current date and time. The
value is used to manage the time band and statistics..
c
ooliNg paramEtErs
the operation of the cooling system can be programmed
for the following functions.
colD uNit ENablE
You can disable the operation of the cooling unit. The
change will apply as soon as you restart the machine.
After having enabled the cooling unit, modify the follow-
ing parameters: temperature, defrost and temperature
record enable.
tEmpEraturE
You can directly set the refrigerated box temperature in
°C (from 3.5°C to 20°C) during the operation.
The default temperature varies according to whether the
"food management" parameter of the machine is ena-
bled or not:
- ON: default temperature 3.5°C
- OFF. default temperature 8°C
The differential deviation from the temperature set for the
start/stop of the cooling unit is 2°C
© by N&W GLOBAL VENDING S.p.A.
DEfrost
The function allows for a 20-minute defrost cycle (the
cooling unit is powered off, regardless of the tempera-
ture).
the time interval between one cycle and the other one
can be programmed from 0 to 99 hours (every 6 hours
by default); the time interval will be determined accord-
ing to the relative humidity and the number of door open-
ings.
If the time is set to 0, the function is disabled.
fooD maNagEmENt
The machine is arranged to manage the distribution of
refrigerated foodstuffs.
The function checks the trays where to provide for con-
trol, the safety temperature of trays (4°C by default) and
the time required to reach the temperature (pulldown, 45
minutes by default).
Use this function (enabled or not according to the ma-
chine layout) to activate the safety temperature control
and to define the range of trays where to provide for
control.
The sale of food products is locked in the following
cases:
- In normal operation mode, the box temperature ex-
ceeds the threshold value for over 15 minutes.
- As soon as you power on the machine and without
having opened the door before, the box temperature
exceeds the safety value.
- After having closed the door, the temperature set in
the box is not reached after 45-minute operation; at the
expiry of this time interval, the delivery of food products
is locked.
If you deactivate the function, you can no longer perform
any check and you can set the box temperature between
5°C and 20°C on all trays.
tEmpEraturE rEcorD
The internal temperature is stored every 10 minutes. Use
this function to read the date, time and temperature you
have recorded.
29
12 2008 3335 00