Direct Selection Keyboard; Power On - Necta Samba Top Installation Operation & Maintenance

NumEric kEyboarD
The numeric keyboard will assume the following func-
tions during the programming cycle:
1 7
NumEric kEys from to
To select a menu item directly by typing the correspond-
ing number shown by the summary tables in the appen-
dix to this manual.
:
NExt mENu kEy �
� to move to the next menu option.
In the case of command management, it varies the logic
status of a data item, where required, or it writes the
value 0 in case of entry of a number.
:
�
prEvious mENu kEy
� to move to the previous menu option.
In the case of command management, it varies the logic
status of a data item, where required, or it writes the
value 8 in case of entry of a number.
:
�
ENtEr kEy
� to move from a menu to a sub-menu or to confirm the
execution of a command.
:
Exit kEy �
� to go back from a sub-menu to a higher level menu or
not to execute the active command for the time being.
Fig. 22
© by N&W GLOBAL VENDING S.p.A.

dirEcT SElEcTioN KEyboard

A 5-button keyboard can be arranged on the machine
(either as a standard or as an option) and associated
with a group of selections.
After having enabled the direct selection function, you
can associate an ensemble of selections with every
single button by specifying the start and end numbers of
the series.
Selections can also affect different trays provided that
they are in sequence.
The products are alternatively dispensed by every single
spiral grouped in a direct selection.
All the selections belonging to the same group shall
have the same price.
to manage the safety devices on the selections prop-
erly, it is recommended to mount the device intended to
detect the dispensing cycle on the machine.

PoWEr oN

Whenever you power on the machine, the display will
show the software release number on the machine.
total VEnDs: xxxxxx
You can programme the machine to display the number
of selections you have made for some seconds.
the machine is set to the normal operation mode after
some seconds. The display will show a message requir-
ing the user to select a product.
19
saMBa toP
software rev. x.x
12 2008 3335 00