Breaks; After Vacuuming - Fakir Red Vac Power User Manual

Breaks

A

After vacuuming

B
C
Usage
Use the park position tube holder on the floor
nozzle to hold the vacuum tube safely in position
during breaks. To do this, insert the tube holder of the
floor nozzle in to the nozzle holder [A] on the back of
the appliance.
WARNING!
Follow the steps below as soon as you finish vacuum
cleaning. Never leave the appliance unattended in the
upright position.
Press the ON-OFF button (B) to switch off the
vacuum cleaner.
Unplug the power cord from the power outlet.
Press the cord rewind button (C) to reel in the cable
Gently guide the cable with your hand until the cable
has been completely wound in.
Insert the park position tube handle on the
telescopic tube to the park rail under the appliance.
Thus, you may carry the appliance with ease or put it
down safely.
Keep the vacuum cleaner out of reach of children.
ATTENTION!
Do not place the appliance next to heat sources and
avoid direct sunlight. High temperature may cause
damage to the vacuum cleaner.
39