Work Breaks; After Vacuuming - Fakir Clyde BL 181 Instructions For Use Manual

Work breaks

Ill. similar

After vacuuming

A
Ill. similar
OPERATING
Use the park holder [1] of the floor nozzle to hold the suction
ube safely in position when the cleaner is not being used. To
do this, insert the park holder of the floor nozzle into the
nozzle holder on the reverse of the appliance.
Follow the steps below as soon as you stop vacuum
cleaning. Never leave the appliances unattended.
B
1. Press the foot button On/Off " [B] " to switch off the va-
cuum cleaner.
2. Remove the plug from the mains socket.
3. Press the foot button cable rewind " [A] " to retract the
cable. Gently guide the cable with your hand until the cable
has been completely wound in.
4. Insert the holder of the telescopic tube into the park rail on
the underneath of the appliance. Now you can carry the
appliance easily or place it on the floor.
5. Store the vacuum cleaner in a place that is out of the reach
of children.
Never place the appliance next to heat sources and avoid
direct sunlight, as the heat may damage the vacuum cleaner.
WARNING!
ATTENTION!
en
13