Breaks; After Vacuuming - Fakir premium TS 2000 CD User Manual

Breaks

A

After vacuuming

B
D
40
Use the park position tube holder on the floor noz-
zle to hold the vacuum tube safely in position during
breaks. To do this, insert the tube holder of the floor
nozzle in to the nozzle holder [A] on the back of the
appliance.
Depending on the equipment (just prestige | TS 2400),
appliance switches to standby mode and LED ring
flashes yellow. When you remove the floor nozzle
from the park holder to continue your work, the vacu-
um clear resumes vacuuming with the last set power.
Warning!
Follow the steps below as soon as you finish vacuum
cleaning. Never leave the appliance unattended in the
upright position.
1. Press the ON-OFF button (B) with your foot to
switch off the vacuum cleaner.
2. Unplug the power cord from the power outlet.
3. Press the cord rewind button (C) to reel in the
cable. Gently guide the cable with your hand until
the cable has been completely wound in.
C
4. Insert the park position tube handle (D) on the tel-
escopic tube to the park rail under the appliance.
Thus, you may carry the appliance with ease or
put it down safely.
5. Keep the vacuum cleaner out of reach of children.
CAUTION!
Do not place the appliance next to heat sources and
avoid direct sunlight. High temperature may cause
damage to the vacuum cleaner.
Usage