Factory Reset - Paxton TOUCHLOCK Compact K Series Quick Start Manual

Factory reset

1. Power down the system.
2. Power the system up whilst pressing and holding 3.
3. The LED's will flash and the unit will beep 3 times a second.
4. Go to the programming guide. - Initialising a new system.
Initialising a new system
Choose a 6 digit Programming Code and load this into the unit as follows:
6 digit Programming Code
You can now set up the user codes and features using the programming chart.
Example: - Setting a user code to unlock the door under Normal conditions.
Enter 6 digit
Programming
Code
Hold for 3 secs
The unit will beep and the LED flashes faster
This box can be used to write down the Programming Code for future reference.
DO NOT USE 123456 - The default User Code (1234) will open the door before the
Programming Code had been fully entered.
The default user code is now set to 1234
8
Enter user code
4-8 digits
Ensure that this information is stored in a secure place.
6 digit Programming Code
Re-enter
user code
4
Normal