Advertisement
Quick Links
10/26/2010
Ins-30013-US TOUCHLOCK K series compact keypad
Technical Support
1.800.672.PAXT
Technical help is available:
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
Fitting
Keypad bezels
Additional bezels are available in black, white, grey, blue and silver. Registered installers can order these free of
charge by logging onto the secure installer extranet:
are not a registered installer please call us on: 877.438.7298 for more information.
FCC Compliance
Class B digital devices.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Class A digital devices.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
support@paxton-access.com
Monday - Friday from 02:00 AM - 8:00 PM (EST)
Saturday from 04:00 AM - 08:00 AM (EST)
https://extranet.paxton-access.co.uk/index.asp.
Paxton
If you
Advertisement
Related Manuals for Paxton TOUCHLOCK K Series
Summary of Contents for Paxton TOUCHLOCK K Series
-
Page 1: Technical Support
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST) Saturday from 04:00 AM - 08:00 AM (EST) Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/ Fitting Keypad bezels Additional bezels are available in black, white, grey, blue and silver. Registered installers can order these free of charge by logging onto the secure installer extranet: https://extranet.paxton-access.co.uk/index.asp. - Page 2 Wiring Bell +12V Exit 12V DC power Exit button supply (push to make) +12V +12V 12V DC release current rating must be less than 1A. Electric release K75 Screw connector option Wire outputs +12V DC Lock 12V Lock 0V Exit input ...
- Page 3 Initialising a new system Choose a 6 digit Programming Code and load this into the unit as follows: IMPORTANT: Do not set the Programming Code to 123456 The default user code is 1234 - the programming code must not include 1234 in the same order. The door lock will release after 1234 and ignore any remaining numbers.
- Page 4 3 - Integration with an entry phone system. QThe output from the entry phone system is used to simulate an exit button for the Paxton equipment. No voltage should be Qapplied to the exit input wires (Blue / Mauve) of a compact unit. Most phone systems will provide a powered pair to release the Qdoor lock;...