Advertisement
Quick Links
14/11/2011
Ins-30042 - OEM Reader keypad kit
Suitability
Wet environments
Security-sensitive doors
Fitting
Exit button
(push to make)
+12V DC
*
12V DC release current rating
must be less than 1A.
* The diode current rating must be
equal to or greater than the current
required to drive the release.
User cards are NOT supplied with this unit. Please supply your own user cards.
0V
Mounted on metal surface
Readers mounted together
-
+
300mm
between readers
9-15V DC
(fuse rating 1A)
Page 1
Advertisement
Related Manuals for Paxton Ins-30042
Summary of Contents for Paxton Ins-30042
- Page 1 14/11/2011 Ins-30042 - OEM Reader keypad kit Suitability Mounted on metal surface Wet environments 300mm Readers mounted together Security-sensitive doors between readers Fitting Exit button (push to make) 9-15V DC (fuse rating 1A) +12V DC 12V DC release current rating must be less than 1A.
-
Page 2: Other Items Required
Please read the following notes before installing Electrical shock can cause injury or death. Remove all power before making any electrical connections, performing maintenance or repair. Mains electrical connections should be made only by qualified personel in accordance with local regulations. Safety goggles should be worn while using power tools. -
Page 3: Fitting The Power Supply
Fitting the keypad Step 1: Carefully mark out the mounting holes for the keypad and the hole of the cable feed. Step 2: Drill the marked holes for the mounting points and the cable feed. When drilling the holes, ensure that you are aware of any hidden cables or pipes. - Page 4 Setting The Master Code The first time the keypad is turned on the GREEN LEDs flash alternately. This indicates a 6 digit Master Code must now be entered. »The Master Code allows access to the Programming Menu. To set the Master Code, do the following: Press Press Press...
- Page 5 Changing the keypad backlight Enter 6 digit Master Code GREEN LEDs flash simultaneously indicating reader is in Programming Mode Press and hold = On Press for 3 seconds = default press = Off to exit programming mode Setting multiple entry codes (maximum = 120) Enter 6 digit Master Code GREEN...
- Page 6 Setting the keypad for additional security Enter 6 digit Master Code GREEN LEDs flash simultaneously indicating reader is in Programming Mode Press and hold = On When enabled, the keypad will Press for 3 seconds deactivate for 60 seconds if = default press there are 20 consecutive...
- Page 7 Adding proximity tokens Up to 2000 proximity tokens can be added to the keypad. Each token is allocated to a memory slot on the keypad. A note will need to be made of the memory slot a token is allocated to, a handy table is included in these instructions for this purpose.
-
Page 8: Technical Help
Operating temperature -20 °C +55 °C Outdoor Use Waterproof IP67 3 metres Cable length Dimensions Width Height Depth 70 mm 115 mm 29 mm The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596 Page 8... - Page 9 Page 9...