Summary of Contents for Paxton TOUCHLOCK Compact K Series
Page 1
Paxton ins-30076 TOUCHLOCK Compact K Series...
Page 2
Quickstart guide This supplement is a brief guide to installing a TOUCHLOCK K series compact system. Further information is available for download at: http://paxton.info/140 or call the communications team on: 01273 811011. +12V Exit 12V DC power Exit button supply...
Page 3
Wiring +12V DC Illustrations in this instruction show the standard keypad. Lock 12V The Stainless Steel version installs and operates in exactly the same Lock 0V manner. Exit input Exit 0V Bell 12V Bell 0V K75 Screw connector option The unit should be mounted in conjunction with an electrical backbox to achieve the required clearance for the connector.
Factory reset 1. Power down the system. 2. Power the system up whilst pressing and holding 3. 3. The LED's will flash and the unit will beep 3 times a second. 4. Go to the programming guide. - Initialising a new system. Initialising a new system Choose a 6 digit Programming Code and load this into the unit as follows: DO NOT USE 123456 - The default User Code (1234) will open the door before the...
START - Enter the 6 digit Programming Code and hold down a function key for 3 seconds. - The unit beeps and the LED flashes faster. Continue the key sequence to set the option - The keypad returns to operating mode. Enter user code Set a user Re-enter user...
Page 6
Additional bezels are available in black, white and satin chrome. Registered installers can order these free of charge by logging onto the secure installer extranet: http://paxton.info/1035 or if you are not a registered installer please call us on: 01273 811011 for more information.
3 - Integration with an entry phone system. QThe output from the entry phone system is used to simulate an exit button for the Paxton equipment. QNo voltage should be applied to the exit input wires (Blue / Mauve) of a compact unit. Most phone Qsystems will provide a powered pair to release the door lock;...
Specifications Electrical 11V DC 14V DC Voltage 100 mA 250 mA Current Switchable current 12V DC Alarm/bell output voltage Cable length 3 metres Features Number of Users 4 digits 8 digits Code length 1 sec 60 secs Door open time Silent operation Can be used with fail OPEN locks Can be used with fail CLOSED locks...
Page 9
The declaration of conformity is available Contact details are provided at: http://paxton.info/596 This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.