The page for specifying the display area for coefficients saving
l
Screen
Check this option if the calibration coefficients for the whole display are to be saved. If the
database for saving the coefficients is a cabinet database, this option will be unavailable.
l
Pixel
Check this option to select the pixel area for which the calibration are to be saved. If the
database for saving the coefficients is a cabinet database, this option will be unavailable.
l
Topology or List
Check this option to select the cabinets for which the calibration coefficients are to be
saved. Note that if the database for saving the coefficients is a cabinet database, one
cabinet should be selected at one time for coefficients saving.
l
Save
Click this button to save the calibration coefficients of the selected display area to the
specified database. If the database for saving the coefficients is a cabinet database, a
dialog will appear for users to input the cabinet ID.
l
Maintain (Only full-screen support):
The software saves by cabinet, supports maintaining, namely when network or other
problems occur and cause saving suspended, select maintain to continue saving from the
cabinet having error.
83