Samsung XA067T User Manual page 81

l Fast Upload
The uploading speed will be set as maximum thus the time required for uploading is
minimized if this option is selected.
l Stable Upload
The uploading process is more stable and reliable for this option. But the time required is
longer than the Fast Upload option.
l Upload
Click this button to upload the selected calibration coefficients to the hardware.
l Save
Save the selected calibration coefficients to hardware (FLASH). The saved data won't be
lost even the system is powered off.
Save Coefficients to Database
This operation is to read back the calibration coefficients form the current LED display and
save them to a database file.
Step 1 The calibration coefficients read back can be saved to an existing database or a
new database. Shown as below which are the pages for saving
coefficients to an existing database and a new database respectively.
The page for saving calibration coefficients to an existing database
Open
Click this button to open an existing database to save the read back calibration
coefficients. The new saved coefficients will replace the old ones according to the position.
If the coefficients array size of the opened database is smaller than that of the current
display, the save operation will be failed. If the opened is a cabinet database, the ID list of
the existing cabinets of the database will be shown.
81