Samsung XA067T User Manual page 62

Scan Board setting
Choose the `Scan Board` as shown in Fig 9-7.
l Quantity
This is the number of LED displays that are to be configured.
l Configure
This button is used to load the Screen Number to the NovaLCT application.
l Read form HW
This is used for the application to read the LED display information from the hardware.
l Detect Communication Status
This is used to check whether the communication within the current LED display is good.
l Read the Number of Receiving Cards
Get the number of receiving cards loaded by each of the Ethernet ports of the current
sending card.
l Enable Mapping (only supported by some receiving cards of the Armor series)
When this function is opened, current serial number of the cabinet and its Ethernet port No.
will be shown on the cabinet.
l Load from File
Load screen information files save on control computer.
l Save to File
Fig 9-7
62