Seat Belt; Use For Children Under 6 Months; Adjusting The Handlebar; Adjusting The Footrest - JANE KENDO Manual

Hide thumbs Also See for KENDO:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
H. SEAT BELT
Your pushchair has a safety harness to keep your child safe at all
times. Fit the belt onto the child whenever he is using the pushchair.
To unfasten the belt system, press the button in the middle of the har-
ness until the straps come open.
To fasten the straps bring the ends of the buckles together and
insert them into the fastener until you hear them click locked.
11 b-11
c
Adjust the belts so that they fit the child correctly with the right ten-
sion. To adjust the length of the belts, slide the buckles up or down.
Make sure that the belts are not
I. USE FOR CHILDREN UNDER 6 MONTHS
To use the seat with children under 6 months old, adjust the angle of
the seat to its most reclined position.
Adjust the harness to its lowest position.
28
EN
a
11
twisted.11
d
c
14
e
11
J. ADJUSTING THE HANDLEBAR
The handlebar can be adjusted to the required height.
To do this, unlock the levers found on the left and the right of the
handlebar, adjust it to the required height, and then fasten the two
levers again.
12 a-12
b
K. ADJUSTING THE FOOTREST
The footrest can be adjusted to different positions. To do this, simulta-
neously press the buttons found on the outside of the seat to move it
downwards. To move it upwards you don't need to press the buttons,
simply pull the footrest up.
13
!
WARNING: Do not let the child stand up on the footrest.
L. ADJUSTING THE ANGLE OF THE BACKREST
So your baby can travel in the most comfortable position at all times,
you can adjust the angle of the backrest.
To lower the backrest pull the strap found on the back, with the red
logo, downwards to the required position.
a
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kendo outlet 20205531 t775531 t765531 t79

Table of Contents