Quick Start Guide - Sprout Immerse Instruction Manual

03.
Charging Immerse:
1. Connect the DC cable and a power source to
Immerse DC input 15V/4.3A.
2. White LED lights indicate the level of charge
*Full charge will take about 2-3 hours.
Bluetooth Pairing:
1. Press power button for approximately three seconds,
blue LED will turn on to indicate power is on.
2. Press Bluetooth button once, red and blue LEDs
will flash to indicate Immerse is ready for pairing
3. Turn on Bluetooth on your mobile phone/
music device
4. 'Immerse' will appear on your mobile phone/
music device. Select 'Immerse' to pair.
5. Once your mobile phone/music device is paired with
Immerse, you will hear 'Bluetooth connected'
6. Enjoy your music.
*If LED is not flashing red and blue, press Bluetooth
button one more time.
**If you are not familiar with Bluetooth pairing for your
mobile phone or music device, refer to the user guide for
your mobile phone/music device for instructions to pair a
new device using Bluetooth.
***Immerse will always store the last device paired and
if the device is within Bluetooth range, Immerse will
automatically search & pair with the device.
06

Quick Start Guide

.
**
.
*
.
*
.
***