Crestron Avia Dsp Configuration; Connections; Device Discovery/Access; Device Configuration - Crestron Avia DSP-1282 Configuration Manual

Crestron Avia DSP Configuration

This section provides the following details:
How to set up connections to the amplifier and speaker
l
How to access the DSP on the network (once powered)
l
How to configure the DSP for registration and integration with the Mitel PBX
l

Connections

Make the following connections:
Connect microphone to DSP MIC/LINE INPUTS port 1
l
Connect DSP LINE OUTPUTS port 1 to "Audio In" on amplifier
l
Connect "Audio Out" of amplifier to speaker
l
Connect LAN port to network
l
Connect VOIP port to network
l

Device Discovery/Access

Use the Crestron Toolbox and the Crestron Avia tool to discover and access the connected
LAN and/or VOIP ports) DSP devices.
Use the Help menu to assist when performing the discovery and configuration procedure.

Device Configuration

The basic setup for a phone call requires:
An analog input (such as from a microphone) routed out through the phone line
l
Audio coming in from the phone line routed to an analog output (such as to an
l
amplifier or speaker)

Configure the DSP Device

Use the Crestron Avia tool to select and configure the DSP device.
4 • DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 Configuration Guide — 8341B