Software Requirements; Hardware Requirements; Product Description; Summary - Crestron Avia DSP-1282 Configuration Manual

The lab network consists of the following components:
Mitel PBX
l
Mitel phones
l
Crestron Avia DSP as SIP users
l

Software Requirements

MiVoice Business (Mitel PBX): 8.0 PR3
l
Crestron Avia DSP: v1.00.121
l

Hardware Requirements

MiVoice Business (Mitel PBX) either in a virtual environment or with a hardware
l
server
Public Switched Telephone Network (PSTN) gateway
l
MiTel Phones - 5360 IP phones (2)
l
Crestron Avia DSP devices (2)
l

Product Description

The Crestron Avia DSP products (DSP-1282 and DSP-1283, specifically) consist of a family
of programmable digital audio signal processors intended for the commercial sound
market. Each version provides 12 analog mic/line inputs and eight analog line outputs. The
devices include a Local Area Network (LAN) connection and a Universal Serial Bus (USB)
connection for programming and control. The programmable signal flow is a fixed
topology with user-configurable input and output processing chains using a library of
preset signal-specific DSP blocks.
Use the Crestron Avia tool to control and configure the Crestron Avia DSP devices on the
network.
Use the Crestron Toolbox™ software to discover and control all Crestron devices on the
network.

Summary

This document describes how to configure the Crestron Avia DSP devices as SIP users. It
also provides information on how to register devices to the Mitel PBX with digest
authentication.
Supported features include:
Registration with digest authentication
l
Basic calls with G711u and G711a codecs
l
Dual-Tone Multi-Frequency (DTMF) support
l
Early media support
l
2 • DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 Configuration Guide — 8341B