Assign Sip Peer Profile By Incoming Did; Automatic Route Selection (Ars) Digit Modification Number - Crestron Avia DSP-1282 Configuration Manual

Assign SIP Peer Profile by Incoming DID

Use the SIP Peer Profile Assignment by Incoming DID window to assign incoming digits
from the PSTN to the Mitel.
To assign a profile (for this example):
1. Click Trunks > SIP > SIP Peer Profile by Incoming DID.
Mitel: SIP Peer Profile Assignment by Incoming DID
2. Click Add.
3. Enter 9722657277-9722657279 for the Incoming DID Range.
4. Enter PSTN-Crestron as an optional Comment.

Automatic Route Selection (ARS) Digit Modification Number

Configure digit modification for outgoing calls on the SIP trunk to PSTN to absorb or inject
additional digits according to the chosen dialing plan. This example absorbs one digit.
1. Click Call Routing > Automatic Route Selection (ARS) > ARS Digit Modification Plans.
Mitel: ARS Digit Modification Numbers
2. Change Digit Modification Number 1, by selecting 1 for the Number of Digits to
Absorb while dialing out to PSTN.
3. Click Save.
28 • DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 Configuration Guide — 8341B