Configure Network Element - Crestron Avia DSP-1282 Configuration Manual

Configure Network Element

To create a network element for the PSTN gateway:
1. Click Voice Network > Network Elements.
2. Click Add.
Mitel: Configure Network Element
3. Enter PSTN_GW for the Name (for this example).
4. Enter Other for the Type.
5. Enter 10.64.1.72 for the FQDN or IP Address (for this example, which is the IP
address of the PSTN gateway).
6. Enter 1 for the Zone. This setting ensures a G711u and G711a codec.
7. In the SIP Peer Specific section, do the following:
a. Enter 5060 for the SIP Peer Port (for this example).
b. Leave all other fields at the default values.
8. Click Save.
10 • DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 Configuration Guide — 8341B