Configure A Call Forwarding Profile - Crestron Avia DSP-1282 Configuration Manual

Configure a Call Forwarding Profile

Configure call forwarding on the device via the Call Forwarding Profile. The example below
describes the procedure to configure a Call Forward Type of Always from DN 5000 to DN
5005.
1. Click Users and Devices > Advanced Configuration > Call Forwarding Profile.
2. Click Add.
Mitel: Call Forwarding Profile
3. Enter 1 for Enter the number of records to add.
4. In the Define the Add Range Programming Pattern section, do the following:
a. Enter 5000 for the Number.
b. Select Always for the Call Forwarding Type (for this example). Other options
include Busy Internal/External and No Answer Internal/External.
c. Enter 5005 for the Forwarding Destination.
d. Click On for Forwarding Enabled.
5. Click Save.
36 • DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 Configuration Guide — 8341B