DSP-860, DSP-1280, DSP-1281, DSP-1282, & DSP-1283
Crestron Avia® Digital Signal Processors
The Crestron® Avia® DSP-860, DSP-1280, DSP-1281, DSP-1282, and
DSP-1283
digital signal processors are functionally similar with varying
capabilities. For simplicity within this guide, the term "DSP" is used except
where noted.
In the Box
1
DSP-860, DSP-1280, DSP-1281, DSP-1282, or DSP-1283,
Crestron Avia Digital Signal Processor
Additional Items
2
Bracket, Rack Ear, 1U (2032122)
1
Cable, Power, 6 ft 7 in. (2 m) (2001134)
DSP-860 Only
14
Connector, 3-Pin (2003575)
DSP-1280, DSP-1281, DSP-1282, and DSP-1283 Only
20
Connector, 3-Pin (2003575)
Install the DSP
The DSP occupies 1U of rack space. Use the three screws from the front
part of each side panel, and a #1 or #2 Phillips screwdriver to attach the
two included rack ears to the device, as shown in the following illustration.
Then mount the device into the rack using four mounting screws (not
included).
Quick Start
1