Configure The Ring Group - Crestron Avia DSP-1282 Configuration Manual

Configure the Ring Group

To configure the ring group:
1. Click Users and Devices > Group Programming > Ring Groups.
2. Click Add (not shown).
3. Enter 1 for Enter the number of records to change.
4. In the Define the Add Range Programming Pattern section, do the following (for this
example):
a. Enter 5010 for the Ring Group.
b. Select Ring All for the Ring Group Mode.
c. Enter 10 for the Class of Service - Day, Class of Service - Night1, and Class of
Service - Night2.
d. Enter 1 for the Zone ID.
e. Leave all other fields at the default values.
5. Click Save.
Mitel: Add Members to Ring Group
6. Click Add Member.
7. Enter 1 for number of records to add.
8. In the Ring Group Members section, do the following:
a. Enter 5000 for the Number.
b. Enter Present for Presence.
Configuration Guide — 8341B DSP-1282 & DSP-1283: SIP Endpoint with Mitel 8.0 PR3 • 37