settings manually. Depending on the devices in your network, you can either press a button (on the
device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices.
Then, they connect and set up a secure network by themselves. See how to set up a secure wireless
network using WPS in the
7.2 SSID Settings(2.4G/5G)
Use this screen to select the wireless security modes and bandwidth for 2.4G/5G network.
Note: If you are configuring the NR2101 from a device connected to the wireless LAN and you
change the NR2101's SSID, channel or security settings, you will lose your wireless
connection when you press Update to confirm. You must then change the wireless
settings of your device to match the NR2101's new settings.
Click SSID SETTINGS(2.4G/5G) and the following screen displays.
Figure 52 SSID SETTINGS(2.4G/5G)
The following table describes the labels in this screen.
Table 22 SSID SETTINGS(2.4G/5G)
LABEL
SSID Settings-2.4G
SSID Settings-5G
Click SSID SETTINGS-2.4G/SSID SETTINGS-5G and the screen are shown as next.
Chapter 7 WLAN & WWAN
Section 7.3 on page
66.
DESCRIPTION
Click this button to configure the 2.4G SSID Settings on the NR2101.
Click this button to configure the 5G SSID Settings on the NR2101.
NR2101 User's Guide
60