Ipv4/Ipv6 Wwan Settings - ZyXEL Communications NR2101 User Manual

Figure 60 WWAN SETTINGS
The following table describes the labels in this screen.
Table 26 WWAN SETTINGS
LABEL
WWAN Settings
Roaming
IPv4 WWAN Settings
IPv6 WWAN Settings

7.5.1 IPv4/IPv6 WWAN Settings

Use this screen to configure your NR2101's IPv4 WWAN and IPv6 WWAN settings. Click WWAN SETTINGS >
IPv4 WWAN Settings/ IPv6 WWAN Settings and the screen appears as shown.
Chapter 7 WLAN & WWAN
DESCRIPTION
Select Enable to activate data roaming. 3G/4G/5G roaming is to use your mobile
device in an area which is not covered by your service provider. Enable roaming to
ensure that your NR2101 is kept connected to the Internet when you are traveling
outside the geographical coverage area of the network to which you are
registered.
This field allow you to configure the NR2101's IPv4 WWAN settings.
This field allow you to configure the NR2101's IPv6 WWAN settings.
NR2101 User's Guide
69