Optidew User's Manual
2
INSTALLATION
2.1
Mounting
Optidew Wall Mount
The Optidew can be wall mounted using the four mounting points on each corner
(see figure 2 for mounting point dimensions). It is possible to install the Optidew Wall
Mount outside, providing it is shielded from direct sunlight and the climate is within the
environmental requirements listed in Appendix A Technical Specifications. It is highly
recommended to choose the weatherproof option if the installation will be outdoors.
Installation
Install using quantity 4 machine screws + washer. Unit must be secured to a solid
surface (e.g. brick, concrete, wood min 0.4"/10mm thick) or to a metal chassis plate of
minimum 0.12"/3mm thickness.
Optidew Bench Top
The Optidew Bench Top is designed to be placed on a bench or table to operate.
Alternatively it can be used directly from within the optional Transport Case.
Kahn Instruments
Figure 2
Optidew Wall Mount mounting points
9.4
(240)
10.2
(260)
INSTALLATION
3