Electrical Connections; Electrical Supply - Kahn Optidew Series User Manual

Optidew User's Manual
2.3

Electrical Connections

2.3.1

Electrical Supply

The Optidew accepts a power supply of the following specification:
Voltage
Frequency
Power Consumption
See Appendix A, Technical Specification, for full operating parameters.
Optidew Wall Mount
The wall mount is supplied with a connector wired to a 6 foot cable.
This power connector is wired as follows:
NOTE: The Optidew Wall Mount is designed for continuous operation and therefore does
not feature a power on/off switch. As soon as power is applied, the display (or DCC
button on the transmitter version) will illuminate and the transmitter will initiate a DCC
cycle. Refer to Section 4.4.1.
Replacement power cables are available - contact Kahn Instruments.
Optidew Bench Top
The Optidew Bench Top is supplied with a 6 foot IEC cable. The IEC socket on the side
of the instrument features an integrated ON/OFF switch.
Fuse
This product is provided with an externally mounted fuse located next to the power
connector.
Kahn Instruments
The instrument must be GROUNDED
100-240V AC
50 – 60Hz
30VA max
INSTALLATION
WARNING:
9