Optidew User's Manual
OPERATION
Outputs
Outputs screen
Figure 17
Output selector
Selects the output to be adjusted
arrows
Determines the mA output range
Output Type
Available input: 0-20mA, 4-20mA
Assigns the chosen calculated or measured parameter to this
output channel
Parameter
Available input: DP, Temperature, Pressure, %RH, wvp, g/m
,
3
g/kg, ppm
, Wet Bulb
V
If the selected alarm is tripped, then this output will be forced to
Alarm
Namur alarm level (20.6mA).
Available input: None, System, Process, Both
The minimum output range for the selected parameter
Minimum
Available input: Dependant on parameter
The maximum output range for the selected parameter
Maximum
Available input: Dependant on parameter
Kahn Instruments
23