Introduction; Olp-35V2/-35Sc/-38V2; Optical Power Meters - Viavi SmartPocket OLP-35V2 Operating Manual

1
I
NTRODUCTION

OLP-35V2/-35SC/-38V2

OLP-35V2/-35SC/-38V2

Optical Power Meters

The handheld Optical Power Meters
• OLP-35V2 (BN 2333/12)
• OLP-35SC (BN 2333/13)
• OLP-38V2 (BN 2333/14)
measure power levels on fiber optical systems.
The Test Sets are specially designed for high performance
testing of all optical signals and systems, i.e. broadband, PONs,
and Gigabit Ethernet.
Battery operation from two AA batteries and the robust, shock-
proof design provide long operating time in the field even under
tough conditions. AC line operation via a separate AC adapter
and the USB interface ensure ease of use in the laboratory or
production environment.
Common features
All OLP-3xV2 power meters can connect to single-mode and
multi-mode fibers with a max. core diameter of 50 µm.
Tests on systems from different manufacturers with different
connector types are easy to handle due to the UPP adapter for
1.25 and 2.5 mm ferrules (OLP-35V2/-38V2 only).
A suitable optical source is required for measuring attenuation.
The Viavi OLS-3x and OLS-3xV2 Optical Light Sources are ideal
for this application.
Both modulated and unmodulated light signals can be
measured. The average power of modulated light signals is
displayed.
Modulated signal mode, which uses different fixed frequencies,
can be used to identify fibers in a fiber bundle, for example.
The "Auto-" function provided by the OLP-3xV2 Optical Power
Meters allows automatic wavelength detection. This application
requires a wavelength encoding light source, e.g. one of the
Viavi OLS-3x or OLS-3xV2 Optical Light Sources.
OLP-35V2/-35SC/-38V2 O
1 I
NTRODUCTION
P M
PTICAL OWER ETERS
5