Agilent Technologies J2300D System Manual page 3

Notices
Copyright © 2001, 2002 Agilent
Technologies, Inc. All rights reserved.
No part of this manual may be reproduced in
any form or by any means (including
electronic storage and retrieval or
translation into a foreign language) without
prior agreement and written consent from
Agilent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
5971-5001
Edition
Third edition, February 2002
Software version 14.0.0
Printed in Singapore
Agilent Technologies, Inc.
5070 Centennial Boulevard
Colorado Springs, CO 80919-2497 USA
Trademarks
Microsoft ® is a U.S. registered trademark
of Microsoft Corporation.
Windows ® and MS Windows ® are U.S.
registered trademarks of Microsoft
Corporation.
2
Documentation Warranty
The material contained in this document is
subject to change without notice. Agilent
Technologies makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Agilent Technologies shall not be
liable for errors contained herein or for
incidental or consequential damages in
connection with the furnishing,
performance, or use of this material.
Warranty
A copy of the specific warranty terms
applicable to your product and replacement
parts can be obtained from your local Sales
and Service Office.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in
accordance with the terms of such license.
Product Support
Call your local Agilent Technologies
representative, or:
Tel: 1-800-452-4844
Fax: 303-754-4802
or call your local Agilent Sales and Service
Office.
Web:
http://onenetworks.comms.agilent.com/
CAU TI O N
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in damage to the product or
loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are
fully understood and met.
WA RNI NG
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or death.
Do not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
Advisor Mainframe Features System Guide