8.2 Transmitter Battery
Please charge the transmitter when the power is off.
USB Adapter
(5V/0.5-2.0A)
Power Bank
Computer USB Port
1) Connect USB charging cable and transmitter charging interface.
2) Plug the USB charging cable in to a USB charging port on the
computer, power bank or USB adapter
3) The GPS / charging indicator light on the transmitter will turn on
when the battery is charging, and will turn off while the battery is
fully charged.
Before charging, please check the contents of the "
Battery" section of the
" Safety Guidelines"
Charging
interface
(5V @ 0.5 to 2.0A ).
carefully!
-11-
9.0 DRONE'S BATTERY INSTALLATION
Push the battery into the battery compartment, make sure that the
battery is firmly installed.
Use of
As shown in the figure above, push the battery outward to remove
the battery easily.
-12-