Transmitter Battery - Holy Stone HS175 Instructions For Use Manual

9.2 Transmitter Battery

1
2
1) When the transmitter battery runs low, the transmitter will continue to
sound the "DiDiDi..." alarm.
2) Connect the USB charging cable to the charging interface.
3) Plug the USB charging cable into a USB charging port on the computer,
power bank or USB adapter
4) The red indicator light on the transmitter will turn on when the battery is
charging, and will turn off when the battery is fully charged.
5) Charging time: about 60 minutes.
・Before charging, please check the contents of the
"Safety Guidelines"
section of the
Unfold the transmitter
1
2
(5V / 1.0 to 2.0A ).
Fold the transmitter
carefully!
-13-
2 2
1
USB Adapter
(5V/1.0-2.0A)
Power Bank
"Use of Battery"
1