Fitting And Replacing Grinding Tools - HTC 650 HDX Manual

Operation
4. Tip the machine further back, until all of the machine reaches the floor,
see Figure 4-8, page 18.
Figure 4-8.
4.5

Fitting and replacing grinding tools

As the machine is equipped with the patented EZchange tool system, fitting and
replacing grinding tools is quick and easy. The tool system consists of wings on which
diamond grinding tools are fitted without the need for screws.
Warning!
Disconnect the electrical supply when cleaning, carrying out maintenance,
changing tools or repairing the machine.
Warning!
During grinding, the tools become very hot. Tip the machine back and allow it
to stand for a short while. Use protective gloves when removing the tools.
18
HTC 650 HDX
3.0