Table of Contents
Advertisement
Machine description
1.
2.
3.
4.
5.
6.
7.
12
Power - Standby indicator: Indicates that the machine's functions have been
activated. Shines with a green light when the start key (7) is turned to the right
"On".
Overload - Overload indicator: Lights up to indicate that the machine is using
too much power. If this is ignored, the power supply to the motor will be
interrupted and an error code generated.
Reset - Resetting the electronics: If the machine experiences an error, it can be
reset by pressing and holding the button in for two seconds. Any error code is
shown on the display in the electrical cabinet, see Electronic error codes, page
26.
Speed - Rotation speed: Regulates the rotational speed of the machine's
grinding discs.
Start/Stop- Start/stop the grinding discs' rotation. Turn the knob to "Start" to
start the rotation, turn the knob to "Stop" to switch off the rotation.
EM-Stop - Emergency stop switch: In an emergency, press the switch to cut
the power to the machine.
On/Off - Start key to start/stop the machine's functions: Turn the key to "On",
to activate the machine's functions and prepare for starting. Turn the knob to
"Off" to switch off the machine's functions.
HTC 650 HDX
3.0
Advertisement
Table of Contents
